EN | Íđ╬─

Davor Sdn Bhd
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-26139527 (Office)
+6012-2919166 (Sales)
Davor Southern Touchpoint
13A, Jalan Kencana 1A/24,
Taman Pura Kencana,
83300 Batu Pahat,
Johor, Malaysia.

Latest News

Copper Anti Seize Supplier in Malaysia

Jul 27, 2019
Copper Anti Seize Supplier in Malaysia
View Full Size
Hot Product: Copper Anti Seize

Davor always promote copper anti sieze to all of our customers due to its outstanding protection features. As copper anti seize is under-utilized and people don’t understand their purpose, it has been an afterthought solution after you had snapped the head of the bolt or screw that already waste you lots of time.
 
There are many types of anti seize products and how you choose your anti-seize is depend on your application. Below are the three major anti seize for your references.  

 
Copper anti-seize can operate until 1,100 Degree Celcius. Copper is the most favourable anti-seize as it has good corrosion protection. Copper aniti seize spray also available. Furthermore, Davor is supplying one of the most well known copper anti seize which is called Copaslip. This product protects fasteners from seizure induced by extremes of temperature, pressure and corrosion.

In general, copper can be applied on all steel except for stainless steel. Copper on stainless steel create an intracrystalline corrosion and cause the stainless steel to crack and break. 


2) Nickel Anti Seize
Nickel anti-seize has excellent chemical and oxidation resistance. This make nickel anti-seize suitable to be used in oil and gas industry. Nickel is a good anti-seize and provide superior corrosion protection on all steel include stainless steel. The maximum operation temperature of nickel anti-seize until 1400 Degree Celcius.

 
Chrome anti-seize has high operating temperature up until 1500 Degree Celcius. Chrome is the most superior anti-seize and can operate under extreme temperature and enviroment also give good corrosion protection.
 

Contact Us:-
DAVOR LUBRICANTS CONSULTANT
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166
Website: www.davor.com.my
 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
 

Lube-Tips - How to deal with rusty surface

Jul 20, 2019
how to monitor compressor oil condition

Rusting is a redox reaction of the iron and oxygen that forming iron oxide. Basically, rusting will occur in the presence of water (H2O) and oxygen (O2) and those are present naturally. So, the possibility of rusting is very possible.

Rusting give more disadvantages rather than advantages. Rusting tend to vent in technical malfunctions of the machine, it weakens the structure of the metal and cause the safety, health and environmental risk in the plant. Thus, here how you can prevent or remove or slowing down rusting.

1.  Rust Remover
 
Rust remover is a concentrated acid that used to remove the rust on affected area.
          
Product Link:- Arrow Rust Remover 28
https://www.davor.com.my/index.php?ws=showproducts&products_id=1758466&cat=Cleaning-Chemical-Degreaser&subcat=Arrow-Solutions#openproducts
 
2. Anti-rust Oil

Anti-rust oil provides a protection layer to prevent the metal from corrosion and act as water displacing agent. Anti-rust oil has:
  • Medium-term protection against metal corrosion: 1 to 3 months. 
  • Long-term protection against metal corrosion: 4 to 6 months, or longer.                                                                                

 AVGO ANTI RUST OIL
https://www.davor.com.my/index.php?ws=showproducts&products_id=2097071&cat=Anti-Rust-Oil&subcat=AVGO#openproducts

3. Cold Zinc Galvanizing
       
Cold zinc galvanizing is application of the zinc coat on the metal. The zinc coating prevents the corrosive substances from reaching the metal. This method is slowing down the corrosion of the metal as after the zinc at the affected area already consumed, the corrosion on the metal will be occur.

Spanjaard Cold Zinc Galvanizing
https://www.davor.com.my/index.php?ws=showproducts&products_id=2498979&cat=Cold-Zinc-Galvanising&subcat=Spanjaard#openproducts


Contact Us:-
DAVOR LUBRICANTS CONSULTANT
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166

Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.

Lube-Tips - About Developer (Dye Penetrant Liquid)

Jun 29, 2019
how to monitor compressor oil condition

Principle of developer
 
The role of developers is to draw the penetrant from the cracks out onto the surface to form visible indication. With visible penetrants, developers provide a white background so that red dye penetrant indications are easy to identify. The penetrant indication is not the actual size of the crack as the penetrant spreads through the developer over time. Specifications state minimum and maximum development times to address the spread of penetrant through developer. The minimum development time should allow enough time for penetrant to be pulled from the surface open flaw and spread on the part surface for enhanced visibility. The maximum development time is in place to minimize excessive penetrant “bleed out” from an indication that could potentially obscure the indication.
 
Types of Developers
1. Dry Powder Developers
Dry powder developers are fluffy white powders that may be applied manually with powder spray bulbs or spray guns or by dipping and dragging parts in the dry powder developer. Dry powder developers deposit a light dusting on the part surface and are only suitable for fluorescent penetrant inspections. Specifications prohibit the use of dry powder developers with visible dye penetrant inspections since dry powder developers would not provide an adequate white contrasting background for visible dye penetrants.

2. Water Soluble Developers
Water soluble developers are supplied in powder form and are mixed with water. Water soluble developers are only for use with fluorescent penetrants. Water soluble developers may not be used with visible dye penetrants because, like dry powder developers, water soluble developers do not produce an adequate white contrasting background that is necessary for visible dye penetrant inspection.

3. Water Suspendible Developers
Like water soluble developers, water suspendible developers are supplied in powder form and mixed with water. However, water suspendible developers do not dissolve in water. Instead, they form a developer suspension. The developer suspension must be continuously agitated to provide a consistent developer concentration. Water suspendible developers may be used with both fluorescent and visible dye penetrants since water suspendible developers produce a suitable white developer coating that enhances both visible dye and fluorescent penetrant indications.

4. Nonaqueous Developers
Nonaqueous developers are supplied ready to use. Spray is the preferred application method for nonaqueous developers, and aerosol cans are a convenient option. Nonaqueous developers contain white powders suspended in volatile solvents and require mixing prior to use. When applied by spray, the solvent evaporates and leaves a dry white developer coating on the part surface. Nonaqueous developers are suitable for both fluorescent and visible dye penetrant inspections.

5. Non-Aqueous Wet Developer Aerosols
Non-Aqueous wet developer aerosols are powder particles mixed with a quick drying solvent. The powder is suspended in the solvent and is sprayed onto a substrate. The solvent evaporates, leaving an opaque white coating and contrasting background for fluorescent and visible penetrant inspections.

 
Product Link:-
https://www.davor.com.my/index.php?ws=showproducts&products_id=2488101&cat=Dye-Penetrant-Liquid-dye-pent&subcat=Spanjaard#openproducts


Contact Us:-
DAVOR LUBRICANTS CONSULTANT
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166
 

Happy Father's Day

Jun 16, 2019
Happy Father's Day
View Full Size
Dad is a Gamer for kids, Engineer at home, Adventurer at outdoor, Problem Solver in working. No matter where is our dad, Spanjaard have the range of Lube for him. :-) 

Happy Father's Day!

Product Link:-
Chain Oil

https://www.davor.com.my/index.php?ws=showproducts&products_id=2479106&cat=Chain-Oil&subcat=Aerosol-Spray-Can&subsubcat=Spanjaard&lang=en#openproducts

Rust Preventive
https://www.davor.com.my/index.php?ws=showproducts&products_id=2498979&cat=Cold-Zinc-Galvanising&subcat=Spanjaard&lang=en#openproducts

Multi Purpose Oil
https://www.davor.com.my/index.php?ws=showproducts&products_id=2556335&cat=Multi-Purpose-Spray&subcat=Spanjaard&lang=en#openproducts


Contact Us:-
DAVOR LUBRICANTS CONSULTANT
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166

Middle East Torpedo Attacks Send Oil Price Soaring

Jun 14, 2019
Middle East Torpedo Attacks Send Oil Price Soaring
View Full Size

Oil prices surged early on Thursday after two oil tankers were reported to have been hit by explosions in the Gulf of Oman between Iran and the United Arab Emirates (UAE), a month after a previous incident in Middle Eastern waters.

As of 09:35 a.m. EDT on Thursday, WTI Crude was surging 3.17% at $52.76, while Brent Crude was soaring 3.42% at $62.02, as renewed tension in the Middle East has the market worried that oil supply along the world’s most important chokepoints in the region may be under threat.

Selamat Hari Raya Aidilfitri 2019

Jun 1, 2019
Selamat Hari Raya Aidilfitri 2019
View Full Size
Wishing all Muslim Selamat Hari Raya Aidilfitri.

From,
Davor Sdn Bhd

Happy Wesak Day 2019

May 19, 2019
Happy Wesak Day 2019
View Full Size
DAVOR wishing you and your family a peaceful and Happy Wesak Day 2019!

Lube-Tips - About Penetrant and It's Dwell Time (Dye Penetrant Liquid)

May 18, 2019
how to monitor compressor oil condition

Dwell Mode Method
The penetrant liquid can be applied in a number of different ways, including spraying, brushing, or immersing the parts in a penetrant bath. Basically there are two types of dwell mode method which is immersion-dwell and drain-dwell. Immersion-dwell is lettling the past immered in the penetrant liquid during the dwell time, drain-dwell is letting the test piece to sit for a sufficient period of time for the penetrant to fill into any flaws and crack. The drain-dwell mode has been shown to produce the most sensitive results. However, there is no harm in allowing a penetrant to dwell longer than the minimum time as long as the penetrant is not allowed to dry on the part.
 

Two Basic Penetrant Materials
Type 1 - Fluorescent Penetrants: they contain a dye or several dyes that fluoresce when exposed to ultraviolet radiation. 
Type 2 - Visible Penetrants: they contain a red dye that provides high contrast against the white develper background. 
 

Dwell Time
Penetrant dwell time is the total time that the penetrant is in contact with the part surface. The dwell time is important because it provides the sufficient time to allow the penetrant to penetrate into the flaws and cracks area. Dwell times are usually recommended by the manafacurer and each formulation are not design to perform the same. It is depends on the size of defects and material. 
 
Penetrant dwell time is the total time that the penetrant is in contact with the part surface. The dwell time is important because it allows the penetrant the time necessary to seep or be drawn into a defect. Dwell times are usually recommended by the penetrant producers or required by the specification being followed. The penetrant must possed a number of important characteristics:-
 
- spread easily onver th eseufrca of the material
- be drawn into surface breaking defects iby capilary action. 
- be highly visible or fluoresce brightly to produce easy to see indications. 
- not be harmful to the matrial being tested or the inspector. 


Product Link:-
https://www.davor.com.my/index.php?ws=showproducts&products_id=2488101&cat=Dye-Penetrant-Liquid-dye-pent&subcat=Spanjaard#openproducts


Contact Us:-
DAVOR LUBRICANTS CONSULTANT
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166
 

Annual Dinner 2019

Feb 3, 2019
Annual Dinner 2019
View Full Size
Annual Dinner 2019 was organised by management on 18th of January 2019. It is a token of appreciation to all the employees.

In 2018, Davor has achieved astonishing year to become one of the major lubricants and engineering provider in Malaysia.

Looking forward 2019, we will continue our effort to provide value and solution to all of our customers. With the team, we are confident to achieve another higher milestone.   

See you at the top of lubricants and engineering! Cheers...

Solid demand to underpin lithium as price slides in 2018

Nov 3, 2018
how to monitor compressor oil condition

An oversupply of lithium this year has nearly halved prices this year in China, halting an unprecedented run for the key component for batteries used in electric vehicles.

Lithium Multi purpose grease

Contact Davor for discounted price for Lithium Grease and Lithium Complex Grease.. 


Contact Us:
Email: sales@davor.com.my
Phone: +6012-2919166
Whatsapp: +6012-2919166
Website: www.davor.com.my
For areas:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, 
Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.
 

Vietnamí»s International Exhibition on Machine Tools & Metalworking Solutions, 2018

Oct 15, 2018
Vietnamí»s International Exhibition on Machine Tools & Metalworking Solutions, 2018
View Full Size
METALEX Vietnam 2018 is where the manufacturing and supporting industries annually converges to discover effective metalworking solutions, product launches, critical business intelligence and collaborative partnerships for business growth in the emerging market of Vietnam. With 10,000 diverse buyers and 500 brands from 25 countries, this is the platform that covers all aspect of metalworking which will take the manufacturing industry by storm.


Product Link:-
Fuchs Renolin Hydraulic Oil (Germany)
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166

Fear Has Driven Oil Prices Too High

Oct 6, 2018
how to monitor compressor oil condition

The bulls are well and truly back in the oil market, with many analysts and traders predicting $100 oil by Christmas. But upon closer inspection, these claims appear to be driven fear and greed as opposed to fundamentals.

 

Contact us for more information on the promotion price of hydraulic oils, gear oils, air compressor oils. vacuum pump oils, slideway oils, heat transfer oil, refrigerant oils, transformer oils, white oils, lubricants and greases. 

Product Link:-
Fuchs Cassida Food Grade Compressor Oil (Germany)
 
Nynas Ammonia Refrigerant Compressor Oil (Sweden)
 
Fuchs Mineral Air Compressor Oil (Germany)
 
LUBTEX Synthetic Compressor Oil (UK)
Email: sales@davor.com.my
Whatsapp: +6012 - 291 9166

Latest Discounted Price for Hydraulic Oil 68, 46, 32

Jul 7, 2018
latest discounted price for hydraulic oil 32, 46, 68


hydraulic oil discounted price malaysiaDAVOR is one of the largest lubricants distributors in Malaysia. 

In conjuction with our company anniversary celebration, we are offering a great promotion price for all range of hydraulic oil. These are included ISO VG 32, 46 and 68 which are the most common and fast moving lubricants. We are the supplier of SHELL TELLUS and MOBIL DTE as well. 

Please contact our sales office to get the latest hydraulic oil price list. 

Product Link:-
 
 
Contact our Sales Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my. 

Lube-Tips - How to monitor compressor oil condition

Jun 3, 2018
how to monitor compressor oil condition

As many compressors run in severe environments, here are some point that you might use to monitor your compressor oil condition so that can extend the life of the oil.
 
Total Acid Number (TAN)
The oxidative life of fluid is determined by total acid number (TAN). The weak organic acid that produce as oil oxidize is measured by titration of potassium hydroxide (KOH) that neutralize one gram of oil. The new oil acid number is compared to the used oil acid number to determine the degree of oxidation.
 
Viscosity
Viscosity changes are also monitored to indicate oxidation problems and also the introduction of a heavier or lighter contaminant fluid.
 
pH
Some air compressor operate in corrosive air environment. Thus, pH is good indicator to the acid gases and the depletion of corrosion inhibitors.


Product Link:-
 
Fuchs Mineral Air Compressor Oil (Germany)
 
LUBTEX Synthetic Compressor Oil (UK)
 
contact our Sales Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my. 

Grease Selection

May 19, 2018
Grease Selection
View Full Size
Davor is supplying high quality of greases to meet customer's machine operating requirements. There are more than thousand of greases in the market and it leads many people get confused. To give you an idea, the common greases for selction are lithium grease, heavy duty grease, multi purpose grease, EP 2 grease, lithium complex grease and it is still parts of it. 

In order to simplify the grease selection progress, we have been highlighted few paramentes to consider during the selection. 


1) Base oil viscosity
The base oil viscosity for bearings can be calculated using a formula that takes the speed and dimensions of the bearing into consideration.
DN = (rpm) * (bearing bore) and
NDm = rpm * (( bearing bore + outside diameter) / 2)
Knowing the speed factor value (DN/NDm) and operating temperature, the minimum viscosity requirement can be read directly from chart.

grease selection based on base oil viscosity chart


2) Base oil type
The base oil type is determined by the conditions in which the grease will perform, such as high and/or low temperatures, load and pressure. The load and pressure not only will influence the base oil type but also the additive package (extreme pressure, anti-wear).
 

3) Thickener type
A good thickener type will be compatible with the equipment manufacturer recommendations and will be able to withstand the conditions under which it must perform.
 

4) NLGI Grade
Speed factor and operating temperature can be used to determine the best NLGI grade for a given application. Table show general guide to selecting NLGI grade based on speed factor and operating temperature. 
 
Operating
Temperature
DN (Speed Factor) NLGI No.*
-30 to 100°F 0 - 75,000
75,00 - 150,000
150,000 - 300,000
1
2
2
0 to 150°F 0 - 75,000
75,00 - 150,000
150,000 - 300,000
2
2
3
100 to 275°F 0 - 75,000
75,00 - 150,000
150,000 - 300,000
2
3
3
*Depends on other factors as well, including bearing type, thickener type, base oil viscosity and base oil type
 

 
Contact Us:
Email: sales@davor.com.my
Phone: +6012-2919166
Whatsapp: +6012-2919166
Website: www.davor.com.my
For areas:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, 
Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.

Lube-Tips - Important factors that influence hydraulic oil performance

May 5, 2018


There are several factors that influence the way hydraulic fluid performs, including:
  • Viscosity
  • Wear
  • Corrosion
While the above list is not all-inclusive, it does mention some of the most important factors that can influence hydraulic fluid performance.
 
Viscosity
Hydraulic fluid’s viscosity requirements are determined by the hydraulic system’s load as well as its minimum and maximum operating temperatures. The right hydraulic fluid for your hydraulic system will need to maintain a minimum viscosity even at the hottest operating temperature, but it must not be too viscous to pump at low temperatures.
 
Wear
Wear affects the moving parts of hydraulic systems and occurs when metal contacts metal. A good hydraulic fluid will help reduce wear by lubricating moving parts and providing a thin layer of protective oil.
 
Corrosion
Corrosion of hydraulic system components is usually caused by acidic chemical corrosion, system rusting, or both. A good hydraulic fluid should have rust inhibitors and other additives that protect against corrosion and rusting.

DAVOR markets full range of hydraulic oil as below:
Hydraulic Oil ISO VG 10
https://www.davor.com.my/index.php?ws=showproducts&products_id=1864892&cat=Hydraulic-Oil&subcat=Hydraulic-Oil-10#openproducts

Hydraulic Oil ISO VG 32
https://www.davor.com.my/index.php?ws=ourproducts&cid=188384&cat=Hydraulic-Oil&subcat=Hydraulic-Oil-32#openproducts

Hydraulic Oil ISO VG 46
https://www.davor.com.my/index.php?ws=ourproducts&cid=188386&cat=Hydraulic-Oil-46&subcat=Hydraulic-Oil-46

Hydraulic Oil ISO VG 68
https://www.davor.com.my/index.php?ws=ourproducts&cid=188385&cat=Hydraulic-Oil-68&subcat=Hydraulic-Oil-68

Hydraulic Oil ISO VG 100
https://www.davor.com.my/index.php?ws=ourproducts&cid=222188&cat=Hydraulic-Oil-100&subcat=Hydraulic-Oil-100

Contact our Hydraulic Oil Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my. 

Lube-Tips - How to choose the correct gear oil

May 5, 2018


Davor helps customer to choose the correct gear oil visosisty for optimum gear box performance. In order to sleect the best lubricant for a gear set, the following criteria must be addressed:
  • Base Oil Type
  • Viscosity
  • Additives

Base Oil Type
Properties Mineral oil Synthetic Polyglycol Ester
Viscosity-Temperature behaviour
normal
good very good good
Ageing Resistance normal good very good good
Low-Temperature Characteristics poor very good good good
Wear Protection normal good very good good
Friction Coefficient normal good very good very good
Neutrality towards sealing materials and paints very good very good poor poor

Viscosity-Temperature Relationship
A flat VT- curve permits the use of one and the same viscosity of an oil at low and high temperatures.
 
Good ageing and oxidation stability 
These characteristics ensure adequate lubricant service life and use at high service temperatures.

Neutrality towards non-ferrous metals, paints and elastomers
The brass cages of rolling bearings, sliding bearing materials, interior paints as well as the elastomers and plastics which seals and viewing glasses consist of must not be affected by the lubricant. 

 
Viscosity
It is important to understand the methods for viscosity selection and the factors that affect the requirement.
 
The viscosity for a gear lubricant is primarily chosen to provide a desired film thickness between interacting surfaces at a given speed and load. Because it is difficult to determine the load for most viscosity selection methods, the load is assumed and the determining factor becomes speed. In general, the most common viscosity available in the market is gear oil ISO VG 220

The chart below is applicable to spur, helical and beveled enclosed gear sets. Other charts exist for worm gears and open gearing. To use this method, the type of gear set, gear geometry, operating temperature and the speed of the slow speed gear must be determined.

Determine gear oil viscosity chart based on speed


Additive
EP gear oils contain special additives called extreme pressure that enhance their film strength or load-carrying ability. The most common EP additives are sulfur phosphorous, which are chemically active compounds that alter the chemistry of machine surfaces to prevent adhesive wear under boundary lubrication conditions.
 
In less severe applications, antiwear additives may also be used to provide wear protection under boundary lubrication conditions. 

Rust and oxidation inhibited (R&O) gear lubricants do not contain antiscuff additives or lubricity agents. R&O gear oils generally perform well in the categories of chemical stability, demulsibility, corrosion prevention and foam suppression. These products were designed for use in gearing operating under relatively high speeds, low loads, and with uniform loading (no shock loading).
 
boundary lubrication with extreme pressure, anti wear additve


Davor Gear Oil Range:-
https://www.davor.com.my/index.php?ws=category&cid=174380&cat=Gear-Oil#openproducts



Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei

Lube-Tips - Is Your Lubricants A Truly Food Grade?

Apr 11, 2018
Lube-Tips - Is Your Lubricants A Truly Food Grade?
View Full Size
Food Grade Lubricants

Davor markets full range of food grade lubricants that are comply to NSF requirement. These products are suitable for lubrication in applications where there is the possibility of incidental or accidental food contact. 

However, t
here are so many food grade lubricants in market today. Does it really safe? Or it just goes through the market by manufacturer’s claim and labeling? Don’t let the curiosity killed the cat!
 
National Sanitation Foundation (NSF) does the testing, inspection and certifying the product. Just click http://info.nsf.org/USDA/psnclistings.asp to check out either your food grade lubricant certified or not!!!

Key in either the company name, product name, registration number to confirm the REAL food grade lubricants.


                                                    


Davor Food Grade Grease Product Link:-
https://www.davor.com.my/index.php?ws=showproducts&products_id=2899698&cat=Food-Grade-Grease&subcat=Food-Grade-Grease#openproducts

Davor Food Grade Lubricating Oil Product Link:-
https://www.davor.com.my/index.php?ws=category&cid=285557&cat=Food-Grade-Lubricating-Oil#openproducts

Davor Food Grade Paste Product Link:-
https://www.davor.com.my/index.php?ws=category&cid=285713&cat=Food-Grade-Paste#openproducts

Davor Food Grade Aerosol Spray Product Link:-
https://www.davor.com.my/index.php?ws=category&cid=285714&cat=Food-Grade-Aerosol-Spray#openproducts



Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei

Lube-Tips - Best Way To Eliminate Hydraulic Oil Leakage

Apr 11, 2018


One drop of oil that drips once per second will result in a loss of 405 gallons in a year’s time. At the cost of $9 per gallon, that one leak costs $3,645 in one year.
Here 3 ways to eliminate the oil leakage:
 
1. SHOCK SUPPRESSOR
• The suppressor is pre-charged with dry nitrogen. The recommended pre-charge of nitrogen is half the maximum system pressure.
• The suppressor should be installed as close as possible to where the shock is occurring.
 
2. SYSTEM PIPING AND HOSES
• Eliminate the use of 90-degree fittings in the pipe and tubing because at 90-degree turns it creates turbulence and shock generated thus causing leakage.
• Clamps should be spaced every 5-8 feet and within 6 inches of the termination point.
• A hose should be installed at the outlet of the pump prior to entering the manifold or main header, this will reduce shock when oil flow rapidly.
• The length of the hose installed should be in the right length.
 
3. PRESSURE SETTINGS
•The maximum pressure limiter in the system should be set 200 psi higher than the pressure required to move the load. If the pressure is set higher than that, excessive shock will be generated when starting and stopping the actuator.
 
 
Full article can be read here:
http://www.machinerylubrication.com/Read/30941/hydraulic-oil-leakage


Full Range of Hydrauic Oil
https://www.davor.com.my/index.php?ws=ourproducts&cid=172273&cat=Hydraulic-Oil#openproducts

fuchs renolin hydraulic oil iso vg 32 46 68
Contact our Sales Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my. 

Mr Sam Zhou (Eclipse Magnetic Principle) Join Visit to Manufacturing Exhibition Indonesia 2017 Dec

Dec 30, 2017
Mr Sam Zhou (Eclipse Magnetic Principle) Join Visit to Manufacturing Exhibition Indonesia 2017 Dec
View Full Size
DAVOR Sdn Bhd represent Eclipse Magnetic Filter which is a sub micron filtration for industrial fluids such as oils and coolants. Our Patented magnetic filtration systems are the ultimate in filtration technology, providing cost, quality and environmental benefits. 
  • remove 100% of ferrous contaimination*
  • reduce disposable filter costs by up to 100%*
  • extend fluid life by up to x10*
  • reduce reject rates to zero*
  • Investment payback in 3 months*
Eclipse Magnetic Filtration System (UK):
https://www.davor.com.my/index.php?ws=ourproducts&cid=149541&cat=Eclipse-Magnetic-Filtration-System#openproducts

Contact our Sales Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my. 


Switch to Mobile Version
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start