Davor Sdn Bhd
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-26139527 (Office)
+6012-2919166 (Sales)

Hydraulic Oil

Hydraulic Oil
It is universally applicable demulsifying hydraulic fluids  and lubricating oils. They can be used in all types of  mobile and stationary hydraulic units where the use of  a demulsifying hydraulic oil (type HLP) is recommended. 

Synergistically acting additives guarantee a long life-time and the highest hydraulic performance. Even at high temperatures and high loads the base oils together with the additives ensure that the system will be operated reliably during a long lifetime.

Hydraulic Oil Viscosity and Efficiency
One of the most important criteria in the selection of a hydraulic fluid is viscosity. A low viscosity fluids can lead to increased friction and pump wear. A fluid that is too high in viscosity, on the other hand, will cause poor mechanical efficiency, startup issues and wear due to cavitation. Therefore, selecting the proper fluid involves optimizing oil viscosity in terms of volumetric and mechanical pump efficiency. To accomplish this, the requirements of the hydraulic components, as well as the operating temperature range, must be taken into consideration.

To select a hydraulic fluid using the Temperature Operating Window criteria, determine the lowest ambient temperature at startup and the highest fluid temperature in use. For instance, consider a machine shop with low temperature startups of 45ºF and a top system temperature of 150ºF. Compare this temperature range to the TOW chart. ISO VG 46 and ISO VG 68 fluids cover the upper and lower bounds of the 45ºF to 150ºF range.

temperature operating window chart to determine hydraulic oil viscosity

The second criteria of hydraulic oil viscosity selection is about type of pump, temeperature and pressure. Below is the recommendation. 
Pump Type Temperature (Degree C) Pressure bar Viscosity
Gear 70 34.5 ISO VG 32 | 46 | 68
60 34.5 ISO VG 15 | 22 | 32
Vane 70 34.5 ISO VG 15 | 22
70 69 ISO VG 22 | 32 | 46
60 69 ISO VG 15 | 22 | 32
40 69 ISO VG 10 | 15
Piston 70 34.5 ISO VG 15 | 22
70 172.5 ISO VG 22 | 32| 46
60 172.5 ISO VG 32 | 46
40 172.5 ISO VG 15 | 22
70 293 ISO VG 46 | 68
60 293 ISO VG 22 | 32 | 46
40 293 ISO VG 15 | 22

lubricants tips - how to choose the correct hydraulic oil
Lube-Tips - Important factors that influence hydraulic oil performance

Lube-Tips - Best Way To Eliminate Hydraulic Oil Leakage

Contact our Hydraulic Oil Consultant in area Malaysia (Selangor( Klang, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan, Terengganu, Perak (Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my.

Fuchs Renolin Hydraulic Oil VG 10

Fuchs Renolin Hydraulic Oil 32

Fuchs Renolin Hydraulic Oil 46

Fuchs Renolin Hydraulic Oil 68

Fuchs Renolin Hydraulic Oil 100

Fuchs High Viscosity Index (VI) Hydraulic Oil Renolin B 68 HVI

AVGO Heavy Duty Anti Wear Hydraulic Oil ISO VG 32

AVGO Heavy Duty Anti Wear Hydraulic Oil ISO VG 46

AVGO Heavy Duty Anti Wear Hydraulic Oil ISO VG 68


Switch to Mobile Version