Language: EN | 中文 | BM |

Share:


Copper Anti Seize - Spanjaard Malaysia

COPPER ANTI SEIZE

Product Description
Anti Seize Lubricants/Compound are mainly to prevent galling and fretting problems subject to high temperatures. The most common anti seize lubricants/compound is copper type. Copper Anti Seize also known as copper grease, copper paste or copper compound. It is for the assembly of all threaded connections subject to high temperatures. It also can be applied on spark plug threads, brakes mounting, brake pad (behind), cylinder head and exhaust manifold studs, high temperature and/or corrosive environments. It is also suitable for application to gaskets and packing. For all these applications, the products make dis-assembly possible without welding or seizure.


Benefits 
Copper anti seize helps to prevent two major seizing problem which is called galling and fretting. Galling is when two metals are in contact and the friction produce heat high enought to weld the metals together. This led to the breakage or torn of the thread during tighten or loosen the nut. Fretting happened when two metals in contact experiencing oscillation and cause rupture of the material. Fretting always caused the metals to fatigue crack and decrease the fatigue strength of the materials.

 
Insutruction
The bulk versions should be applied by brush or finger.


Typical Properties
TYPICAL PROPERTIES COPPER ANTI-SEIZE
Consistency NLGI No. 2
Penetration (1/10mm at 25°C, 60x) ASTM D217 275
Penetration change (10 000 x) 35
Dropping point None
Timken OK load, kg (ASTM D2509) >25
Copper corrosion test (ASTM D130) 1b
Base oil viscosity at 40°C, cSt (Brookfield) 100
Max operating temperature as thread/anti-seize lubricant 1 100°C
Key metallic component Copper
Colour Golden
Exceeds requirements of MIL-A-907E (US Military Spec) Yes
Average torque to loosen threaded connection after being subject to:  
565°C 70Nm
1 100°C 200Nm
Co-efficient of friction at 200N 0.140
Compliance with latest First World Environmental Legislation No
Resistance to contact with Ammonia None
Resistance to Electrolytic Galvanic Corrosion None
Suitable for use on Austenitic/Stainless Steels No
High load, slow-moving lubricating properties Excellent
Protection against corrosion of battery terminals Excellent
Apply to back of disc pads to eliminate squeal Yes
Contents of aerosol packs 400 ml
Packing in tubes 100g
Other packs (500g, 5kg, 15kg, 50kg & 180kg) Yes

 
Packing
500 gram can
100 gram tube
 

Technical Data Sheet
technical data sheet of copper anti seize
technical data sheet of copper anti seize


Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.
 

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.