Language: EN | 中文 | BM |

Share:


Nickel Anti Seize - Spanjaard Malaysia

NICKEL ANTI SEIZE has excellent chemical and oxidation resistance. This make its very suitable to be used in oil and gas industry. Nickel is a good anti-seize and provide superior corrosion protection on all steel include stainless steel. The maximum operation temperature of this lubricants can up to1400 Degree Celcius. 

 
Outstanding Features
- Prevents seizure and galling during assembly.
- Enables the easy dismantling of corroded component.
- Provides highly effective anti-seize in aggressive conditions, including chemical environments and salt water
- Enables components to be reused after dismantling

 
Application Instruction
The aerosol should be sprayed onto the surfaces from approximately 10cm distance. The bulk versions should be applied by brush or finger.


Typical Properties
TYPICAL PROPERTIES NICKEL ANTI-SEIZE
Consistency NLGI No. 2
Penetration (1/10mm at 25°C, 60x) ASTM D217 275
Penetration change (10 000 x) 35
Dropping point None
Timken OK load, kg (ASTM D2509) >25
Copper corrosion test (ASTM D130) 1b
Base oil viscosity at 40°C, cSt (Brookfield) 100
Max operating temperature as thread/anti-seize lubricant 1 400°C
Key metallic component Nickel
Colour Silver
Exceeds requirements of MIL-A-907E (US Military Spec) Yes
Average torque to loosen threaded connection after being subject to:  
565°C 62Nm
1 100°C 190Nm
Co-efficient of friction at 200N 0.136
Compliance with latest First World Environmental Legislation No
Resistance to contact with Ammonia Fair
Resistance to Electrolytic Galvanic Corrosion Fair
Suitable for use on Austenitic/Stainless Steels Fair
High load, slow-moving lubricating properties OK
Protection against corrosion of battery terminals OK
Apply to back of disc pads to eliminate squeal No
Contents of aerosol packs 350 ml
Packing in tubes No
Other packs (500g, 5kg, 15kg, 50kg & 180kg) Yes


Packing
500 gram can
 

Technical Data Sheet
technical data sheet of nickel anti seize
technical data sheet of nickel anti seize


Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.