SILICONE GREASE

Product Description
Spanjaard HTS Silicone Grease is an inorganically thickened grease, recommended for rubber (o-ring grease) and plastics. This grease is water resistant, chemically inert, has excellent electrical insulating properties and has a long life span under conditions where conventional grease cannot be used. It is comply to food grade HSF H1 requirement as well. 

 

This grease can be used to lubricate parts and bearings under low speeds and light loads. It can be used for all high and low temperature applications (silicones are however not the best lubricants for normal ambient conditions). However, this grease is not suitable for High Impact Polystyrene (HIPS). 

 

This grease can be used as lubricants that does not affect rubbers and plastics e.g.

- Refrigerator and car door seals.

- Swimming pool rubbers and seals.

- Plastic gears and mechanisms.

- Electric cables drawn through conduit.

- Laboratory glass joints.

- Rubber components and cylinder rolls in train air brake applications.

- NSF registered (H1 and H2 status).

 

It also a great water & corrosion resistance grease which can be used to seal electrical equipment against the ingress of moisture, and protects metal parts against corrosion e.g.

- Seals outdoor electrical fittings.
- Protects chrome plating.

- Seals screw threads and automobile battery terminals.

Silicone grease is an insulating compound that prevents electrical leakage and short circuiting e.g.

- Sealing and potting of electrical and electronic components.

- Prevents tracking on insulators.

- Protects automobile ignition systems.

- Prevents ionisation and sparking on electrical equipment.

 

It also acts as a releasing agent in the rubber & plastics industries as well as many others e.g.

- Can be used as a release agent for polystyrene, PVC, phenolic and other resins.

- Prevents binding of components when coiled insulation varnish is cured at high temperatures.

- Acts as a mould release for rubber as well as a lubricant and preservative.

- Prevents resin build up when epoxy and other glues are used.

- Prevents icing up in deep freezers & on ski bindings.

Packing
Choose from the 500 gram bottle or the 15 kg pail to suit your needs. If you need 100 gram Tube, you many consider our Silicone Paste which can serve the same applications. 

Where to Buy
1) Walk-in Purchase - DAVOR Sdn Bhd stands as the Exclusive Sole Distributor of Spanjaard products in the Malaysia, guaranteeing you unparalleled quality and  authenticity. Get in touch with our dedicated Walk-in Purchase Contact nearby to explore our Spanjaard Silicone Grease. 

2) Our Indoor Support - Feel free to reach out to our knowledgeable Indoor Sales Representative by Email, WhatsApp or Call, who are ready to answer your queries, provide guidance, and facilitate your purchase.

Typical Properties

HTS Silicone Grease	Typical Value
Consistency – NLGI Grade	2
Worked Penetration, 25 Degree Celcius, 1/10mm	275
Colour	White
Thickener	Lithium
Drop Point, Degree Celcius	None
Evaporation Loss 30hrs@200 Degree Celcius, %	2.0
Cold Temperature Stability (-50 Degree Celcius)	Conforms
Dynamic Rust Test	<1
Copper Corrosion – 24hr/100 Degree Celcius	Pass
Oil Seperation 30h @200 Degree Celcius, %	4.0
Water Wash Out @93 Degree Celcius, %	1.0
Timken OK Load, kg	1
Oxidation Resistance, D942,%	1.0
Dielectric strength, kV/mm	15
Useful Temperature Range Degree Celcius	-40 to 200
Oil Viscosity cSt, 40 Degree Celcius	500
Flash Point, Degree Celsius	>250