High Pressure – Rare EarthProduct Data
The Micromag HP50 has all the same benefits of the standard Micromag but has been developed to suit high pressure through-spindle-coolant applications, where the smallest of particles can damage seals, spindles and even reduce the efficiency of the cutting tool.
For further information relating to the benefits and operation of the Micromag HP50 please refer to the supplied standard Micromag brochure.
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds. Only metallic particles are removed from the filter and these can be easily disposed. There are no dirty cartridges!
Grinding, edm machine, laser cutting, super finishing, wash station
Mild steel, cast iron sub micron chips and particle
Neat and soluble oils, cutting oil, coolant
Pre- or post-pump, delivery line, spindle feed or premembrane cartridge.
- High pressure
- Sub micron filtration
- Large holding capacity
- High intensity rare earth magnetic material
- Suitable for all machining applications
- Environmentally responsible
- No consumables
|Part No||Dia A||Height B||Dia C||Port Size||Capacity
|Max Flow Rate
|Maximum Pressure||50 bar|
|Magnetic Performance||High intensity|
|Magnet grade||N45 – Inspected & confirmed via hystergraph prior to use|
|Temperature||5°C to 140°C|
|Tube||304 Grade Stainless Steel|
|Surface finish||Machined and anodised|
Core cleaning post
*Eclipse Magnetic cutting oil coolant Sub Micron Filter distributor in Malaysia (Selangor, Kuala Lumpur, Negeri Sembilan, Melaka, Johor, Pahang, Kelantan, Terengganu, Perak, Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia