SPANJAARD EP2 GREASE is a high quality, all purpose, and lithium-based grease.
Suitable for lubrication of plain, needle, ball and roller bearing of all types. Spanjaard EP2 Grease is fortified with rust and oxidation inhibitors. Spanjaard EP2 Grease is suitable for lubrication of automotive, industrial equipment and mining equipment.
Apply by hand or grease gun. Compatible with other competitive lithium greases. It is always a good practice to flush out old grease when switching lubricants. This is achieved by frequent re-greasing over a short time span.
It is essential that dust and dirt do not get into the bearings and care must be taken to prevent this during grease storage and packing of bearings.
Consistency – NLGI Grade
Worked Penetration, 25 Degree Celcius, 1/10mm
Drop Point, Degree Celcius
Dynamic Rust Test
Copper Corrosion – 24hr/100 Degree Celcius
Oil Seperation 18h @40 Degree Celcius, %
Water Wash Out @38 Degree Celcius, %
@79 Degree Celcius, %
Timken OK Load, kg
Continuous service, Degree Celcius
-20 to 120
Base Oil Properties
Oil Viscosity cSt, 40 Degree Celcius
Flash Point, Degree Celcius
Technical Data Sheet
Contact our sales consultant in area: Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei