MOBIL VACTRA OIL NO 3
Applications
Mobil Vactra Oil No. 3 is normally recommended for large machines where way pressures are high and good precision is required. They are also recommended for vertical and inclined slideways where drain-down can be a problem and for moderate service machine tool gear drive mechanisms.
Typical Properties
|
Mobil Vactra Oil |
No. 3 |
|
ISO Viscosity Grade |
150 |
|
cSt@40 Degree Celcius, ASTM D445 |
156 |
|
Flash Point, STM D92, Degree Celcius |
248 |
|
Pour Point, ASTM D97, Degree Celcius |
-6 |
|
Copper Strip Corrosion, ASTM D 130C, 3h |
1B |
|
Rust Protection, ASTM D 665B |
Pass |
|
FZG Load Support, ISO 14635, Fail Stage |
13 |
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.
Maaf, buat masa ini tiada video yang dimuat naik.
Maaf, buat masa ini tiada fail untuk dimuat turun.
